INSEE Mortar 42 TileFix Plus
Cementitious Tile Adhesive For Large Tiles
INSEE Mortar 42 TileFix Plus contains a special grade polymer to enhance tensile adhesion strength performance and is suitable for non-absorption tile and large tile application. The tile does not require any curing or water soaking. During tile paving, tiles do not slip and it gives adequate time for tile adjustment. Finished tiles do not peel off and strongly adhere to the substrate wall or floor.
Applications
- Suitable for low water absorption including medium and high water absorption tiles such as granito and porcelain tiles for floor and wall tiling works on both interior and exterior surfaces.
- Suitable for tiles size up to 60x60 cm.
- Small natural stone for interior application.
Technical Properties
| Use Information | INSEE Mortar 42 |
|---|---|
| Slake time |
0 Minutes
|
| Pot Life (In shade) |
3 hours
|
| Open Time within |
5-10 Minutes
|
| Adjust Time within |
< 15 Minutes
|
| Curing time before grouting |
24 hours
|
Remark Test result from INSEE Mortar’s laboratory
Technical Information
By weight, 20 Kg (1 bag) of INSEE Mortar 42 TileFix per 4.6-4.8 liters of clean water can cover an area of approximately 4 Sq m depending on tile adhesive thickness and deflection of substrate and tiles.
+
=
Wall Tiling
- Clay Brick / Concrete Block / Lightweight Block
- INSEE Mortar 11 : General Plastering Mortar or INSEE Mortar 13 Lightweight Block Plastering Morta
- INSEE Mortar 42 TileFix Plus Cementitious Tile Adhesive for Large Tile
- Ceramic Tile, Granito sizes ≤ 60x60 cm
Floor Tiling
- Concrete Floor
- INSEE Mortar 31 Floor Leveling Mortar or INSEE MORTAR 32 Easy Floor Screed
- INSEE Mortar 42 TileFix Plus Cementitious Tile Adhesive for Large Tile
- Ceramic Tile, Granito sizes ≤ 60x60 cm Marble, granite (small size) for indoor use
